Rally Subaru Car Wrap

Nothing says “Spring” quite like seeing Rally Cars back on the road. The
Sign-Tech Media Team created a spot decal kit and partial 3M car wrap for the
Rally Subaru Team. With high contrast colors for accenting, this car is certain
to turn some heads. The 3M car wrap product that is used for this vehicle
ensures those hard body lines don’t see any lifting or peeling, but rather will
stay sharp and professional for much longer.

IMG_3405 IMG_3406 IMG_3407 IMG_3410

Wesclean Trailer Wrap

Trailers are the perfect vehicle to use for advertising since they have plenty of room for large, bold graphics and signage. The Sign-Tech Media team designed and installed a partial wrap on this 30 foot trailer for Wesclean Innovation Center.  To save some cost, we installed a mix of digitally-printed graphics and die-cut lettering, instead of a full-coverage wrap. The end result is still very effective. The finished design is also scalable – the graphic elements can be made to fit all sorts of vehicles in their growing fleet.


Scott Arthur Millwork Wraps

Scott Arthur Millwork has a small fleet of vehicles, and all needed to be wrapped. This can be challenging when all vehicles are different shapes, sizes and models. We were able to provide a design that was clean and simple, yet bold and professional. The wraps are most impressive when you see the pickups pulling the trailers on the road.

scott-arthur-fleet-wrap-1 scott-arthur-fleet-wrap-2 scott-arthur-fleet-wrap-3 scott-arthur-fleet-wrap-4 scott-arthur-fleet-wrap-5

Go To Brokers Jeep Wrap

Stephanie, a Mortgage Broker for Go To Brokers, brought her Jeep to us to be wrapped. The challenge was that this Jeep was yellow, and she did not want a full-coverage wrap. We were able to add graphic elements that make a statement and grab attention.

vehicle wrap on yellow jeep jeep-wrap-edmonton-2

AMI Ford Edge

AMI Autoglass brought us their Ford Edge to wrap with graphics matching their current design. Their wraps are all similar in style, although each one is a different make and model. The design is eye catching, and their fleet of vehicles look great side by side.

IMG_1027 IMG_1028 IMG_1029

Calmont Ranger Vehicle Wrap

This partial wrap for Calmont Volvo Truck Centre looks great on their Ford Ranger. Wraps such as these very effective, and costs are much lower in comparison to a full wrap. Sign-Tech media will work one-on-one with you on your own custom wrap, from design to installation. We will also work within your budget, large or small.


Pagnotta Cube Van Wrap

A lot of industrial trade-related companies go with basic signs for their fleet vehicles. Pagnotta wanted their cube van to stand out though, so they chose a bold blue wrap. To keep their costs minimal, they chose to wrap only the sides of the box, with die-cut graphics on the rear. Partial wraps such as these are very cost-effective and can suit most budgets.

Photo Jan 09, 3 56 55 PM

Kingsway Mall Banner

We installed a large banner in Kingsway Mall. This banner is 40′ in the air. This is one of many types of media we supply and install for the Mall. We swap out existing signs and banners throughout the month, as their message is constantly changing.


Tire Boss

Tireboss used their Ford Raptor for some great advertising. We installed a partial wrap on the pickup, which is cost-efficient but still allows for great exposure.

IMG_2736 IMG_2737 IMG_2743